SHINHO XFC-02 Large Diameter Fiber Cleaver
SHINHO XFC-02 Large Diameter Fiber Cleaver

SHINHO XFC-02 Large Diameter Fiber Cleaver
SHINHO XFC-02 Large Diameter Fiber Cleaver

SHINHO XFC-02 Large Diameter Fiber Cleaver

SHINHO

$3,949.00 USD
$3,949.00 USD
Oferta

Fiber laser repair tool

SHINHO XFC-02 Large Diameter Fiber Cleaver

A compact powered cleaver for preparing large diameter optical fiber used in fiber laser service, specialty fiber processing, and laboratory repair workflows.

It uses tension-and-blade cleaving with replaceable clamp inserts, menu-based parameters, blade calibration, and automatic start support for repeatable preparation.

Ordering note: the standard quoted configuration is intended for 250-400 um fiber applications. Confirm cladding, coating, and insert requirements before ordering.

Best For

Repair bench

Large diameter fiber prep

For specialty fiber cleaving before fusion splicing, inspection, or fiber laser repair.

Configurable setup

Insert-based workflows

Useful when coating and cladding diameters require replaceable upper and lower inserts.

Key Features

  • Large diameter fiber cleaving tool for specialty fiber and repair applications.
  • Menu-based parameter selection by fiber cladding diameter.
  • Manual start or auto start after left and right clamps are closed.
  • Replaceable upper and lower inserts for coating and bare fiber diameter matching.
  • Diamond blade with 10 available blade positions.
  • Blade life up to 2,000 cleaves per position on 125 um fiber, 20,000 cleaves total per blade.
  • Manual and automatic blade calibration, blade offset adjustment, battery operation, and power saving mode.

Specifications

Model
XFC-02
Product type
Large diameter fiber cleaver
Application
Large diameter and specialty fiber cleaving for fiber laser repair and production support
Standard range
250-400 um fiber applications, based on dealer quote information
Cleaving method
Tension and blade cleaving process
Blade
Diamond blade, 10 positions, 20,000 total cleaves per blade on 125 um fiber
Control
Parameter selection by cladding diameter; manual parameter setting available
Clamp system
Left inserts match coating diameter; right inserts match bare fiber cladding diameter
Calibration
Manual blade calibration, automatic blade calibration, blade offset adjustment, and annual tension calibration by certified technicians
Power
Built-in battery; external adapter supported

Operation Notes

  • Strip the fiber coating, then clean the bare fiber surface with high-purity alcohol.
  • Select the correct cleaving parameter group according to cladding diameter.
  • Confirm inserts match coating and cladding diameters before clamping.
  • For automatic cleaving, close the left clamp first and then the right clamp.
  • Clean insert grooves before each cleaving session to keep clamping force stable.

FAQ

What fiber size is this listing intended for?

The quoted standard configuration is for 250-400 um fiber applications. Please confirm your exact cladding and coating diameters before ordering.

How long does the blade last?

The diamond blade has 10 positions, with up to 2,000 cleaves per position on 125 um fiber, for 20,000 cleaves total per blade.

Does the XFC-02 support automatic cleaving?

Yes. When auto start is enabled, the cleaver starts automatically after the left and right clamps are closed in the correct sequence.